Key Re-pair


You'll receive this error if there's a key synchronization problem preventing a device from properly retrieving its configuration from CloudTrax. This most commonly occurs after performing a pinhole reset or re-flashing the firmware on the AP.

You can fix this by pressing the "Re-Pair Now" button from the banner that appears in your dashboard.

Once you've initiated a re-pair, CloudTrax will send a new key to the AP or Switch which should clear the error message within two check-ins (~5-10 minutes).

Note: If this is a brand new device being installed, the error should only briefly appear before pairing itself automatically. 

Have more questions? Submit a request!