How to access wired LAN resources

Follow

In order to access local resources on your LAN you will need to bridge one of your SSIDs to your LAN so your wireless clients will get an IP address from your router. 

To bridge an SSID, select the desired SSID, then go into the Advanced section, and enable the 'Bridge to LAN' toggle.

Bridge_to_LAN.PNG

 

Then click "Save Settings" and wait for the configuration to take effect after about five minutes. 

Note: For networks running legacy firmware you can find the option to bridge on the SSID 2 tab. 

Have more questions? Submit a request!